Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, I'm trying to upload a certificate generated by our private CA to the WAP121. I've tried the certificate in both Base 64 and DER format from the MS Cert Server. I attempted to rename the extension to .PEM but it doesn't upload. I've tried using ...
Well, I successfully got my certificate into valid PEM format but the WAP121 still wouldn't accept it. I tried reverting to the first firmware to check if I could get SSH/telnet, but it isn't there. So I conclude that the WAP121 cannot support cert...
Hi ledude101, I think you are correct, the routing isn't working for some reason. I'm not sure what to suggest, though you could try backing up the config, then erase the startup config. Then perhaps try just two VLANs and see if your clients can ro...
Hi Ledude101,It looks like it should work. On the client on Ge1/VLAN 4 can it ping 10.1.4.254? Can it ping 192.168.8.254? If so, are there firewalls in place on the client devices on the other VLANs? For the Internet browsing are you manually confi...
Hi,Are your client devices in the access ports or the trunk ports? If they're in the access ports you'll need to tell the port which VLAN to be in or it will go in the default VLAN. If the client device are in the trunk ports then the client will ne...
Hi,The private CA is MS Certificate Services on Win2008R2. There doesn't appear to be an option to save as PEM, so I've been trying to use OpenSSL to convert from the DER/Base64 format to PEM format. I have been researching and have found a discussi...
