Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm trying to convert Sup720-3BXL from IOS to CatOS as per Cisco instructions. However I'm unable to find the file Cisco have mentioned.http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a00801350b8.shtml#conv2c6msfc3-jsv-mz...
Issue Summary,As per the diagram, we have two server access switches attached to each other with a port channel and attached to distribution switches. Sdi02 has been configured to act as the DR and man02 has been configured to be the RP for the multi...
Hi,Can someone please tell me what's the default idle timeout on IPSEC tunnels. My problem is I have a tunnel created on a 7206 I need to check what's the idle timeout settings on the box. Regards,Anuradha.
Hi,Does anyone have a script that I can run from ciscoworks or opsware to check all uplinks on the camps to find out if there's any erroring ports. (input errors, output errors, crc, etc). I have seen some EEM TTL scripts, but at the moment it's not ...
Hi,Can someone please let me know if you have a unix script to capture interface configuration if the device is running only on ssh. I just wanted to know whether spanning tree port fast is enable on them.Thanks a lot.Anuradha.
Does anyone know whether Nexus 3064 E and X have any limitation of how many VACL session can be created ? I'm hearing only one, but if someone can confirm it would be really helpful. thanks,Anu
Thanks Giuseppe,I was looking for the file stated in the Cisco document, but when I couldn't find it I used the same file you have put in the link and and it worked.Cheers,Anuradha.
All ports in the port-channel has been configured to allow both VLAN 18 and 19. Also I see the same Root Bridge ID for each VLAN. Bizare thing is the very same host can talk to other multicast groups without any problem. And there are many servers i...
Hi Giuseppe,Thank you for your reply. All basic checks seems to be fine. I can't see any difference on distribution switches. And they are configured with ip pim spars-mode. When I do sh spanning-tree vlan 19 and 18, Both switches seems to be acting...
