Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I did suspend a service to update some configuration issues with the web server and I realised that the server couldnt go on the internet to do such. I was able to do that when I had the same server connected to older 11050 but couldnt do such with t...
I replicated the configurations on CSS 11050 box on a new CSS 11500. The configuration is shown below ip redundancy master ip route 0.0.0.0 0.0.0.0 192.168.2.2 1 !************************* INTERFACE *************************interface e1 phy 1...
I am pretty new to Content switching. I have a situation here at my office that I would need some help with.I have an existing 11050 box that I am replacing with a new 11501 running ver 7.2 (the 11050 runs 5.0) and an additional 11501 to be brought i...
I was able to solve it in the end. I had an ACL on Core Switch blocking traffic from AP to/fro WLAN/WLSM Switch. The initial traffic goes through the AP's and access switch (authentication and broadcast) to WLAN/WLSM switch through Core, thereby bloc...
Thank yuo so much Nat. I was able to detect that IOS version i was running is 12.1.13 that is not compartible with flexwan x65xx-PA+ but only with x61xx-PA. I have to change the code to 12.2.17 for the module to be able to work or recognised. Thanks ...
Hi ,My name is Abiodun Adetunji, and i think port spacing will be okay. But try and make it dual face plate (one for data and the other for voice. Try and make it to cater for redundant for the executives or even users i mean two dual face plates. Tr...
