Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello All,I have ASA 8.2 and 5 users using VACSO - Identikey server as RADIUS server with OTP.I need to create 3 groups, and assign users to groups so I can apply Policy (Different groups has different Access list) in the ASA.So the VASCO need to pa...
Dear All,I have ASA 5510 with 8.4 connected to ISG 1000, when traffic is passing the VPN tunnel is working fine, when the traffic stops, ASA will drop the packet but the VPN tunnel on ISG still up .When new traffic started from ISG side, it will drop...
Hello ,In ASA 5510.How I can limit the users in (VLAN 20) to use the internet with a limited Bandwidth/speed with 3 mbps upload and 5 mbps download?In case the outside interface (Native vlan) which is connected to the ISP and have a bandwidth/speed o...
Hello All,I have SSL clientless VPN with webtype ACL, when I add the ACL for RDP , the bookmark for that RDP will show dimmed (can not click on it and on mouse over it shows acess denied) .But for VNC its fine.ACL as below: access-list WEB_ACL l...
Dear All,Currently the ACS 5 is authenticate the iPhone/iPad by using the MAC address (which is entered manually) and AD user/password, i need to do that with certificate, so it will be scalable.How i can do that?RegardsMohammed
Hi ,
The no downshift disable command enablesdownshift on the interface.
To restore autonegotiation (default setting), enter the no speed command in the interface configuration mode.
Let me know if that helps.
Regards,
Mo
Yes, i miss that onefor NO NAT, you can use (inside, any) or (inside,Interface Name here)If (DMZ,Outside), this mean no dynamic NAT added on other interfaces (but only the outside).Regards,MKD
Hi Anthony,I suggest that you enable logging on external logging server, and set the logging to debug level.So if the problem will happen again, you can see the logs in details.Regards,MKD
