Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have an issue with a VPN between an ASA 5515 (9.1(7)29) and a Fortigate 501E (5.6.8). We have the Cisco ASA and the customer has the Fortigate. Both are configured to have an L2L VPN between them. The VPN is up and we see traffic being encrypted an...
Hi,
We have 2 devices configured with HSRP in one interface. Associated to a vlan.
On switch 1:
!interface Vlan16 description HSRP for HA VMware - 2015Nov13 ip address 10.10.10.5 255.255.255.128 no ip redirects no ip unreachables no ip proxy-arp stan...
Hy,I have a network with several layer 2 (c2960) attached to a layer 3 switch (c3750). All these switches are behind a firewall (ASA 5510) and the firewall is connected to a router c3810.I have an ACS v.4.x to use as a Tacacs server.In all the equipm...
I have a 3750 switch and I am trying to configure PBR (route-maps) in it.But when I try to apply the policy to a vlan interface the policy does not show in the interface. So I can not use PBR to choose my default gateway!Question: Does PBR work in a ...
Hi,I am reading things about the 802.11n standard, but I have some things that I do not understand very well.So, can someone tell me what the maximum bandwidth in the 802.11n standard is?That bandwidth is dependent, if I used a 20MHz or 40Mhz channel...
Hi,I saw what you advised. And, the problem was right there.One of the keys was not correct...it had a space.But in previous devices, this configuration had no problem.A question of different IOS...?? Probably!Thanks, Rui Capao
Hi,
the device that is between those switch, does not have any ACL.So, that message it is a bit strange and I think it is something that was part of the previous data.
Thanks,
Rui Capao
Hi,I am not sure about that.That was a thing that I already thought about.I will try to see that possibility... I mean, test that possibility.Thanks, Rui Capao
