I found the Cisco SG250-08 and the Cisco SG250-08HP, but I'm not sure they have a CLI.I prefer working with a CLI.Anyone can recommend an other switch if this one doesn't have one?
We replaced some switches in our environment with Cisco Model C3850.On the other switches (C3560CG and multiple C3560E) the voice vlan was working without problem. We had a VLAN for voice and "switchport voice vlan <id>" on the interface. When we con...
Hello,
I just wanted to know if this is possible or not.
Current situation:
We have a building with multiple floors.
Each floor has his own VLAN.
And all floors have multiple Cisco APs that connect to our Cisco WLC.
The APs broadcast an SSID and ...
I have the same problem. But I don't understand what you mean with "Service port must be on a different supernet from the service-port interface".Care to elaborate? Edit: My problem was that I needed to reboot de NPS server. Now he responds.
LLDP works without problem on the new switches. Thanks.I still find it strange that CDP works on older switches and not on these newer switches.I'm guessing Cisco must have blocked the usage of CDP for non-Cisco phones on their newer switches..These ...
The phones work fine with CDP and our previous Cisco switches even detect them with "show cdp neig"See screenshot: I will try LLDP, but I find it strange that I have to use it just for these new switches.The port config is this:interface Gigab...
Thanks for the replies! Very informative.
I'm going to take the easy way of creating a larger subnet for the Wifi.
The hassle of dynamic vlan assignment look interesting, but not worth it.
