Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
NAM receives NDE traffic, but don't display anything in "Monitor"I've several routers exporting NetFlow v9 to a NAM 3.6(1). If I enable the “Listen Modeâ€, I see packets arrive to the NAM.When I go to the “Monitor†tab and select “NETFLOWâ€...
Hi,When I tried configure enable level access per NGD, it doesn't work.Each time I see the same error:"TACACS+ Enable: Defining Max Privilige on a per network device group to be select".This error is the same if you don't select a NGD. ACSE ignores m...
Hi,I've a client using SAP OSS. With 6.3(4) is ok, but with 7.0(2) doesn't work.I see this message: %PIX-6-106012: Deny IP from XX to XX, IP options: "Router Alert".SAPRouter use source routing.Cisco IOS command "ip source-route" allows handler the f...
Hi buddies,I've a CW2000 VMS 2.3 over Solaris running without trouble. My Network Administrator changed the DNS Server.I've changed the DNS at the Sun Server, but the Server Configuration -> Diagnostics -> Self Test failed with "network.pl". I saw in...
NetFlow v5 and v9 working.Situation: If I enable the individual sources to "Monitor" (each router), I see the NetFlow individually but it isn't work if select NETFLOW under "Monitor" tab.This doesn't happend with SPAN/RSPAN/VACL source. Always, I see...
Two devices are NetFlow v9 (the NAM-2 show the V9 Templates) and one is NetFlow v5.NAM OS is 3.6(1a) Patch 3.0 + Crypto Path.When in "Setup > Data Sources > NetFlow > Devices" I select a device and press "Test", the window shows "Netflow on device: C...
Joe, I've tried manually and "Listen Mode" to add the NDE devices.Also, I've enabled the "Setup > Monitor" to NetFlow.The results are the same: nothing appears in "Monitor" when I select "NETFLOW".??
