About alaquiante

alaquiante · 04-12-2005

I am running C6K in native mode resulting in an image size well above 32 MB. FTP transer works great but I would still like to use TFTP (customer). With a block-size of more than 512 Byte, e.g. 1500 Byte, it should work. I observed that the IOS (12.2...

alaquiante · 08-07-2002

Dear NetPro Forum,I would like to get clarification regarding the way UDLD works. The documentation states that quote "UDLD is a Layer 2 (L2) protocol that works with the Layer 1 (L1) mechanisms ". OK, I am aware of NLP and FLP but please explain to ...

alaquiante · 07-24-2002

Dear NetPro Team,I would like to know if a tunnel configuration will unconditionally drop all packets with destination addresses equal to 0100.0Cxx.xxxx. Is there a wayto allow packets heading to 01-00-0C-CD-CD-CE with a tunnel configuration?I ask be...

alaquiante · 07-19-2002

Dear NetPro Team,I would like to know how and where to issue the to me extremly interesting command show vlan internal usage.Thanks in advanceBy the way the command is described in the documentation!

alaquiante · 07-14-2002

Dear NetPro Team,I would like to know how to determine the right memory size for FlexWan cards. It would be interesting to know which features and processes are running there (for example multilink ppp and QoS?) and how much memory should be provided...

alaquiante · 04-19-2005

Hi Hartmut,The Switch start to negotiate with LACP PDU in fast mode (every 1 sec.)and when the FEC/GEC is stable e.g. running "in Use" slow LACP PDUs are used (every 30 sec.).have a great day,Andy

alaquiante · 04-12-2005

Hi Glen,I am running a windows (2000 prof.) and the tftp32d mentioned. I used ethereal and observed:C6K-Block:65534-------->TFTPC6K<---ACK-Block:65534--TFTPC6K-Block:65535-------->TFTPC6K<---ACK-Block:65535--TFTPC6K-Block:0-------->TFTPC6K<---ACK-Blo...

alaquiante · 04-12-2005

oups, wrong IOS Version mentiond in intitial question. It should be 12.2(17d)SXB4 instead of 12.2(18). Sorry.I am still thinking about the behaviour after block 65535 as well as the negotiation option to use blocks larger than 512 Byte and could nee...

alaquiante · 04-12-2005

Hi Dave,the L3-Engine uses 2 GE Interfaces to connect to the "backplane". Internally an MMC-Asic is used with offers HW-CEF. The RSM uses two FE IFs and Software-Processing unless you use a NFFC or NFFC-II. Performance of the RSM is aournd 150.000 pa...

alaquiante · 04-12-2005

Hi Milan,thanks but I used the tftp mentioned and indeed the deamon returns an ack for block 0 (after block 65535). The issue is (from my point of view) rather the IOS.Andy

Member Since	‎01-04-2002 01:13 PM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	37

User Statistics

User Activity

TFTP above 32MB

UDLD

Tunnel and Cisco MC Addresses

C6K Native IOS: show vlan command

C6K FlexWan

Re: LACP

Re: TFTP above 32MB

Re: TFTP above 32MB

Re: Performance of 4232 L3 card vs Cat5500 RSM/MLS

Re: TFTP above 32MB