Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Dario,In order to that, that nat 0 access-list has been replaced by nat source static [no-proxy-arp] [route-lookup] to give you an example if you want to exempt a host with an ip address of 1.1.1.1 when accessing a host 2.2.2.2 you can configure i...
Check with your ISP your upstream bandwidth. 10mbps on both site may just be downstream bandwidth. You might have 1mbps or less.Sent from Cisco Technical Support iPhone App
