Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Gurus,I cannot no longer access CSC-SSM10 via the ASDM interface?The asdm in launching and i can see the tab for content security, but when i click on it,It will show me asdm can connect to csc.But i can still access the csc through the web browse...
Hi Gurus,I have a connection to ISP_A(int G0/1) and another connection to ISP_B (int G0/2) they all terminated at my router. With interface G0/0 as my internal interface.I have routed traffic from my servers farm (10.10.5.0/24) through ISP_A and my ...
Hi all,attached is the design for a back to back two ASA 5510 with AIP-SSM and CSC-SSM. KIndly advice me on this design, configuration and the security levels that will be attached to each interfaces.Thanks In Anticipation!Tunde
Hi,I am having problem lauching my asdm-633, when ever i types in the ip address of ASA5510 into the browser, i found an error page 404. Below is my run::ASA Version 7.0(6)!hostname SubASAdomain-name suburbanenable password AYWIUZP3a2RE5as1 encrypte...
Hi Experts,Kindl asist me in load the IPS IOS on the IPS 4240 from rommon mode.Note: I can only access the IPS via rommon only becuase the existing ios is cuppted and formatted.The rommon output is give bellow:rommon #2> setROMMON Variable Settings: ...
HI Sean,I did not buy the data license,but i should be able to implement the load balancing with the default IOS (ver15.0) that came with it from the factory.Any Assistant will be appreciated!Thanks
HI Paul,The ethernet cable is already pluged to the management Port, thats why i can point the browser to the csc ip address and log in, but the problems are :From the ASDM i cannot connect to the CSC, also after diverting all traffic from the ASA to...
Dear Aziz,I tried to implement this config on a 2911 router with the Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.0(1)M3, but the IP SLA command in not working.?After i entered the IP SLA command and do a ? the only options i ...
Hi Abdul,Your configs is cool,simulated it and its works great just the way i wanted!!!!Thanks alot mate and to everyone that contributed to this topic.
Hi Naidu,thanks for the quick response,i tried it but its not working, if you look at my config carefully, i created a policy that match my server farm ip address(denied all user traffic ) and set it next-hop to point to ISP_A and all user traffic is...
