About Victor Smith

Victor Smith · 03-23-2016

I have a new setup of a SF300-48PP switch and 15 Ubiquiti Video dome cameras. When directly connected there is no power to any camera. When an POE injector is used there is a connection and data is passed. Looking at the logs it does not show that th...

Victor Smith · 03-24-2016

Well there you go... The units come with injectors so it's off to get power strips to plug into the UPS and a bunch of Ethernet cables. Thanks for the help on this.

Victor Smith · 03-24-2016

Well there you go... The units come with injectors so it's off to get power strips to plug into the UPS and a bunch of Ethernet cables. Thanks for the help on this.

Victor Smith · 03-24-2016

Thanks for the links of information. I check this type which is a video dome and it has passive power needs between 12V and 24V, with a max watt of 4W. I modified the switch ports to put out no more than 4000mWv(4W) but still no draw. The customer's ...

Victor Smith · 03-24-2016

Thanks for responding with information. I did the sanity check and plugged one of the customer's Avaya IP phones into the switch and it powered up with no problem. I then used the same cable and plugged in a camera that had not been installed yet and...

Member Since	‎03-05-2011 09:46 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	5

User Statistics

User Activity

SF300-48PP No POE working for Ubiquiti Cameras

Well there you go... The

Well there you go... The

Thanks for the links of

Thanks for responding with