Hello,  We have configured OTV and believe we have it working between 2 DC's over a point to point routed WAN link. Each DC has a pair of Nexus 7004's using vPC for resilience for down linked equipment. A separate VDC has been created as per the Cisc...

Hi All,We are migrating our existing RIPv2 network to an external WAN setup using EIGRP/BGP. ISP is running BGP and we have configured mutual redistribution - all working perfectly well.For the legacy network we've redistributed RIP into EIGRP on a '...

Hi All,I have a requirement on our wireless network to ONLY approve authentication from machines that are pre-approved. We have our wireless network setup and it's all working well using RADIUS to Microsoft AD servers on the ACS for end user/machine ...

Hi All,I currently have a pair of Cisco 878's in a back-to-back configuration running absoultely fine with a line rate of approx 4Mbps. The 4-wire (EPS-8 baseband) circuit is provided by BT.The ever increasing need for speed has sent me towards inves...

Hi All,I'm sure this question has already been asked and the solution is simple - however it does not appear to be obvious!My requirement is to have an AD group called 'CiscoAdmins' and another called 'VPNUsers'. Using ACS I want to only authorise me...