Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Has anyone experieced having their mouse and keyboard not being responsive when they get into the LSI MegaRAID configuration screen after hitting Ctrl H? I noticed that the keyboard and mouse doesn't respond when I use the console cable so I went ah...
Does anyone know where can I find more up to date UCS stencils? The ones I found on this blog http://rodos.haywood.org/2009/06/ucs.html and whatever was available on the Cisco site are the same ones that I was using last year.I would like to find st...
Has anyone experienced intermittent hanging on bootup during the "initializing scheduler" operation for ESXi 4.1? I've done some searches and only managed to find one blog post but the user was using the B series and ESXi 4.0 Update 2.Thanks.
I'm currently trying to fix the faults we have in one of our UCS environments and one of them is the FSM tab for the VM --> All--> VMware --> Port Profiles.Someone tried to configure a port profile here and the progress status has been stuck for mont...
Can someone let me know what firmware/IOS version they're running on their 3750s for a redundant UCS setup? We ran into a problem last week with our northbound connection to UCS and when we contacted Cisco support, we were told the version we were r...
Hi Robert,I just went ahead to toggle the "Legacy USB Support" to disabled and it looks like it was the culprit in causing the mouse and keyboard to become non-responsive. I probably remembered incorrectly about changing that setting during troubles...
I thought long and hard while troubleshooting the issue and the only setting I could think of was the "legacy usb support" butI recall changing that back to enable but still couldn't get the mouse or keyboard to respond. I think I'm going to do a te...
Hi Robert,Sorry about the late reply as I didn't get to look at this but I did find some time after the holidays and it looks like updating the BIOS version from 1.2.1a to 1.2.2f and the CIMC from 1.2(1b) to 1.2(2d) fixed the problem. I doubt the fi...
Thanks for the information! I did a B series deployment with 4.0 and haven't noticed it after deploying8 blades but I'll definitely notify the client about it in case he experiences it.
