Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have two different GLC-TE SFP modules.GLC-TE G3.1 V01GLC-TE 3.0 V03Which module is newer and does anyone know the difference/changes between the two?Externally, the G3.1 V01 has a plastic bale clasp where the 3.0 V03 has a metal clasp but I'm not s...
I have a wired mDNS server on VLAN 100 and a wireless mDNS client on VLAN 100.I have created the mDNS service, policy, and applied it.The Mobility Express controller can see the server on the wire but it will not forward the traffic to the client on ...
What does transceiver not allowed online mean?%TRANSCEIVER-6-INSERTED: Chassis 1 C0/1: iomd: transceiver module inserted in Te0/1/1
%TRANSCEIVER-3-NOT_ALLOWED_ONLINE: Chassis 1 C0/1: iomd: Detected for transceiver module in Te0/1/1, module disabledSF...
When I enter the command:snmp-server view ISO iso includedWhat MIB is "iso"? For example, I believe "internet" is: 1.3.6.1I'm not sure about "iso" though.
Is it possible to have both Open and Enhanced open (OWE) on the same WLAN?Like how you can enable WPA2 and WPA3 on a WLAN, I would like to enable OWE and still support older clients that don't support WPA3 OWE.Thanks!
It turns out that my old Cisco copper transceivers were counterfeit. Any "Cisco" SFP-10G-T-X module that identifies as an "SR" optic is counterfeit. Genuine transceivers identity as SFP-10G-T-X and because of this, are only supported on the newest Ne...
Thanks, I was specifically wondering the definition of the message: TRANSCEIVER-3-NOT_ALLOWED_ONLINEI've seen things like transceiver not compatible, CRC check failed, etc. I've never seen: Not Allowed Online, so I was curious the exact definition of...
