Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All, Please can someone from Cisco or the Support forum advise.I have had 3 maybe 4 devices have the single 500Gb HDD drives fail of recent. Tonight i attempted to replace the first faulty disk without success.The disk replacement itself went fine...
Hi,I'm wondering if people on here can assit me with a query i have about the way to load balancing a collapsed core/distribution as based on the below diagram.The core/distribution layer will be where the vlan's gateways are configured and will resi...
Hi Finn, Thanks for your reply.The disk we were provided was actually provided in a complete new chassis (WAVE-574) which looking at Central Manager had 4.3.3 on it.Obviously installing the disk itself worked to a point but clearly appears that the d...
Hi Pushpak,I don't think (although I'm not 100% sure) you can do this via the CM. The CM in itself is just like a WAAS box but with a different mode set.You can do this via the GUI on each WAAS box if you prefer. You will just need to setup a "Job" w...
Hi Pushpak Please can you advise what code version you are on and what you are planning to upgrade to? There is an upgrade path that should be looked to ensure your current and planned is upgradeable in 1 or if it needs interim version.You will also ...
Hi Thanks for your detailed reply and apologies for my late reply.There is no real purpose behind needing subnet specific load balancing. The site will be used in the future for VOIP services so i wanted to try and ensure a symmetrical routing flow, ...
ok, but would that enable me to select the vlan subnet ranges to manipulate them? im wondering if its worth etherchanneling to the routers from the VSS cores to limit the number of /30's required.so how does the load balancing work, does it cover a s...
