Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Allwhenever the switch is powered on all of the 48 ports LEDs turn steady green and nothing appears on the terminal connected to console port. Then nothing happens and the switch remains in this state.Any hope to return the switch back to normal?
Hi allMy customer has two different MS Windows AD sites on which he wants to deploy NAC.Site1 and site2 are interconnected via a WAN link.1) Would a single NAC deployment on only one of the sites enough, or two different NAC deployments are required ...
HiMy CS-Mars 110 had crashed for some unknown reason. After reload the device works fine but there is an error with the raid-10 which shows a status of "Degraded", please see attached file.Is there a way to solve this problem?Thanks
HiThe switch boots up immediately into Rommon mode. The flash system is empty. Is there a way to copy a new ios into the flash file system?Thanks for any pointerRegards
HiCannot establish VPN tunnels to a VPN cluster behind a Stongate-1000 firewall, however connection to any of the VPN concentrator devices works fine. What could be the cause of this problem?Thanks in advance
Hi[pnadmin]$ modelmars110localextension[pnadmin]$ pndbusageCurrent partition started on Tue Dec 18 19:10:01 CET 2007 and uses 6.93% of its available capacity. Switching to next partition is estimated for Tue Apr 19 14:00:51 CET 2022.9 empty partiti...
HiI am using th IP address to connect.If I try the real IP address of one of the concentrators, the vpn tunnel can be established, but if I connect through IP address of the VPN cluster the vpn fails to establish. Althgough when I remove the Stongate...
