Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,I Have an UC500 with ios 12.4(11)XW4 and i upgrade to IOS 12.4(22)YB8 to migrate from CME 4.2.0 to CME 7.1.0The ios installed succefully and I'm now with CME 7.1Also I want to upgrade GUI files from 4.2 to 7.1I download GUI files for CME 7.1I ...
Hi All,I have an UC520 with CME7.1 and i configured extension mobility with ipphone as exemple bellow:voice logout-profil 14 pin 1111 user aaaa password aaaa number 4444 type normalephone 14 mac-address A8B1D4FA8805 type 7942 logout-profile 14voice ...
Hi All,I want to apply a PBR on ADSL Router (1800 series) on the return of packet for a user in Lan behind a firwall.so i create an acl with criter of destination ip address of this user.as the access is ADSL, all ip are hided behind public ip adress...
Hi All,I have a router 1841 connected with ADSL and behind this router connected ASA5520 with private IP Adresse.the router ADSL is configured with vpn site-to-site with 3 sites:i want to configure vpn remote client with ASA5520,to do this i want to ...
Hi All,i have a switch 4507 which's connected with 20 floor switch 3560. i have about 600 user.i want to know what's the best solution for implementing port_security with 600 @mac.i configure them on the federator switch or in the floor switchs.thank...
I add ip nat inside under vlan2but still not wroking, just i add the command:ip nat inside source static udp (asa private IP) 500 (ADSL public IP) 500 route-map map-forward extendablei lose connexion with all site connected with vpn site-to-site with...
