Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,A couple of days ago, suddenly my internet connection went down. I was not able to ping or access the router via telnet and ssh. The switch in my room showed a light of the port to the router, so the port on the router must be up.I reset the mo...
Hi,I got an old content service switch, but when i boot the following shows up. I can't put any command or send a break. Hope you guys can help me out.CONSOLE PORT OUTPUT:BootRom...bootingCopyright 1998 (c), Cisco Systems, IncLocked boot flash.Valida...
Hi,I have connected some switches and there are a few weird things. I used a straight trough utp CAT5E cable.WS-C3560-48PS-S (DIS-02) Fa0/1 - Fa0/1 WS-C2950-24 (ACCESS-02) (Link does not come up)WS-C3560-48PS-S (DIS-02) Fa0/25 - Fa0/1 WS-C2950-24 (AC...
Hi all,This is the situation.I have connected some switches: WS-C3560-48PS-S, WS-C3550-24-EMI, WS-C3508G-XL-EN and WS-C2950G-24-EI.WS-C3560-48PS-S (GLC-LH-SM) - LC-SC (Single mode fiber) - WS-C3508G-XL-EN (WS-G5486)WS-C3560-48PS-S (GLC-SX-MM) - LC-S...
JosephDoherty wrote:DisclaimerThe Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any ...
Hi Toshi,This is the output of the command on DIS-02:Name : Fa0/1Administrative Auto-MDIX: onOperational Auto-MDIX: offName : Fa0/25Administrative Auto-MDIX: onOperational Auto-MDIX: onIt is true that i hardcoded the speed and duplex on all switches....
Solution: I made a crossover cable and now the ports come up.Other question: Does both switches have to have auto sensing ports to make it work with a straight trough cable?
