About z080236

z080236 · 06-23-2016

1. Let's say I have 2 subnets , 192.168.1.0/24 and 192.168.2.0/24, i want to configure interfaces 0/1 to 0/12 to VLAN1 to cater for 192.168.1.0/24 and interfaces 0/13 to 0/20 to cater for 192.168.2.0/24, the traffic from VLAN1 can communicate to VLAN...

z080236 · 06-14-2016

How to achieve the above in CLI for Cisco Catalyst 2960x? Grp A users - Use Radius Authentication only Grp B users- Use Local Authentication only

On the authentication rule, · 06-14-2016

On the authentication rule, you need to send a DROP action when User not found Scenario: User A username does not exist in switch, Radius return Access-Accept. How to do a drop command in CLI?

the 3rd method of using · 06-14-2016

the 3rd method of using radius first then local seems to meet my requirements. I implemented the commands below: aaa authentication login default group radius localaaa authentication login CONSOLE localaaa authentication enable default group radius...

Member Since	‎06-14-2016 03:46 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	4

User Statistics

User Activity

VLAN switch questions

Radius authentication for some group of users and local authentication for another group of users

On the authentication rule,

the 3rd method of using