hello I have problems with calls to SKYPE I have the following configuration CUCM 9.1 >>>>SIP TRUNK >>>>GW 2911 >>>>>>SIP TRUNK >>>>PSTN SP1                                                             |                                                             |---->>>>>>>>SIP TRUNK >>>>SKYPE I have this dial peer dial-peer voice 4002 voip description Skype Outgoing translation-profile outgoing Skype destination-pattern 18323913448 redirect ip2ip session protocol sipv2 session target dns:sip.skype.com session transport udp voice-class codec 1  voice-class sip profiles 1000 dtmf-relay h245-alphanumeric ip qos dscp cs5 media no vad   sip-ua credentials username 99051000221230 password 7 111B2332332325282A7E2E027D3A02 realm sip.skype.com authentication username 99051000221230 password 7 083376792D282B333C5F09227F2213 realm sip.skype.com registrar 1 dns:sip.skype.com expires 360 registrar 2 ipv4:10.208.26.20 expires 180 18323913448 number is only for testing a direct number Thanks for your help ... View more

I have the following errors in the discover the server UCS B440 M2 in the chasis UCS 5180 the firmware is 2.1(1f) FSM FSM Status: In Progress Description: Current FSM Name: Discover Completed at: Progress Status: 9% Remote Invocation Result: End Point Protocol Error Remote Invocation Error Code:1002 Remote Invocation Description: Unable to change blade power state-MC Error (-20): Management controller cannot or failed in progressing request thanks for your help ... View more