Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Working on an environment with a 5512X where there is a need to provide bandwidth guarantees for a few subnets behind the FW (for general Internet traffic, which I assume is mostly HTTP/HTTPS).I've never had to do any traffic shaping on an ASA, and f...
So I am trying to implement an SSID that requires a machine to be a domain member, AND require the user to provide username/password credentials before being allowed on that SSID.I am reading that it is possible, but can't find a clear config on how ...
Working on a wireless deployment for a client... wanted to get updated on what the latest best practices are for enterprise wireless.Right now, I've got the corporate SSID integeatred with AD authentication on the back end via RADIUS.Would like to im...
Scenario:Point to point OC3 ATM circuit between two sites that are thousands of miles apart. 3845 on one side with a PA-A3-OC3SMI and a 7206 on the other side with a NM-1A-OC3-POM.Problem:Using iPerf, with a window size of 4MB, I can sustain 120Mbps...
I currently have 2610XM supporting a single T1. Would like to add 3 more T1's and multilink them. If I remember, the 2610 will only support a single T1 speed... is that correct?If so, which current router is recommended for 4 T1's. This will be j...
Thanks Jon...Nexus or not, if you were told you had to migrate from a network using VTP servers at the core, to new core devices that didn't support VTP server mode, is this how you would approach it?
