About Kevin tech

Kevin tech · 05-12-2018

Linksys SPA2102 adapter is registered, but outgoing calls fail with a busy tone at the end. (I only need make outgoing calls, and don't care about incoming calls, just can't test it now) A few days ago I tried make outgoing calls and it worked. Inte...

Kevin tech · 01-26-2017

SPA122 ATA voice adapter, Version 1.3.0 (008_Customer_Test) I'm facing a problem, when I tried to upload the configuration file into ATA via TFTP with DHCP option 66, the box does not restart after loading the file. Device has the factory default pro...

Kevin tech · 05-13-2018

Some point here is unclear. Line 1 is registered, I receive normal dial tone from my phone. Usually this means that the SIP credentials are correct and I can make calls. Otherwise the Line 1 just would not be registered. It's unclear why PBX is refus...

Kevin tech · 05-13-2018

Unfortunately, I can't reach the support. But I attached part of log file, possibly this can help.

Kevin tech · 12-26-2017

Seems, SPA122 have telnet option partially implemented in code, but telnetd daemon is missing, so it can not run.

Kevin tech · 03-25-2017

OK, I find some description of SNMP administration settings in Administration Guide. SNMPv3 syntax is much different from v1/v2, as there is used Authentication, Privacy, EngineID Identifier, therefore any sample SNMPv3 command with default settings ...

Kevin tech · 03-25-2017

Same problem. Can anybody show a few examples of SNMPv3 commands for SPA122?

Member Since	‎01-26-2017 01:42 PM
Date Last Visited	‎07-27-2018 12:07 AM
Posts	11

User Statistics

User Activity

SPA2102 is registered, but no outgoing calls

SPA122 not reboot after loading config file

Re: SPA2102 is registered, but no outgoing calls

Re: SPA2102 is registered, but no outgoing calls

Re: SPA122 SSH or Telnet future support?

OK, I find some description

Same problem. Can anybody