Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi.I've some trouble with a C2950 and my monitoring on Centreon.The check on this switch report that Memory 'Processor" usage is up to 3.49MB for 3.75MB total, 93.05% INSWT253#show process memory
Total: 6142528, Used: 4546980, Free: 1595548
PID TTY...
Hello, I just installed a C9200 stack and configured the MAB with a RADIUS server. I added the mac address of my 40 users in the RADIUS, then I activated the MAB the necessary ports.When I did this 2 days ago everything was fine a priori, but today a...
Hi,
We have two stacks of catalyst 3850 running Denali 16.3.5: each one is composed of a WS-C3850-48T + a WS-C3850-24T linked by stackwise and powerstack. A PAGP etherchannel of 8 Gb/e ports (4 ports on the 48T and 4 on the 24T, so it's a cross-sta...
Here is the log for debug mab all & debug authentication allXXXXXXSWPP01#term mon
XXXXXXSWPP01#show debug
Packet Infra debugs:
Ip Address Port
------------------------------------------------------|-----...
Here is a tcpdump of my Radius server when I connect the Windows server on switchThe RADIUS reply with an accept. tcpdump -i any host 10.200.66.1 or host 192.168.100.246
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
list...
I use DaloRADIUS a web management application It is based on a FreeRADIUS deployment with a database server serving as the backend.Here is the logs that I've on the connexion for this mac adress. All other MAC are in Access-Accept too.
