Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I just configured ASA 5510 and we can access the internet. However, I can't ping any outside IP address for example 8.8.8.8. For a troubleshooting, I test ping 8.8.8.8 from ASA without any issues. But can't ping inside/LAN IP from the ASA. I assume i...
We purchased two SG300 switches. They the same firmware version. One of they has IPv4 Interface configuration.
But other one doesn't have IPv4 Interface. Why?
How can we configure IPv4 Interface if it doesn't show IPv4 Interface?
The client has a site to site VPN connecting two offices. When owner uses VPN client establishing connection to one of office (OfficeA), he can't RDP to the servers in second office (OfficeB). I assume we need to add NAT and access list, but don't kn...
All out firewall and switch are Cisco ASA and switch 2960. One of computers keeps having this problem. Once for a while (in one or two days), the computer can't ping outside IP address like 4.2.2.2 and 8.8.8.8. The computer can ping inside network re...
From ASDM, I don't see policy-map global-policy. After I added it at ASDM, it works. These are the current settings for working. Don't know why. Thank you for help. policy-map global_policyclass inspection_defaultinspect icmpinspect ip-optionsinspec...
I added those policy. However, from LAN 192.168.9.0/24 still can't ping 8.8.8.8. Attached is the configuration. ciscoasa# show run policy-map!policy-map type inspect dns preset_dns_mapparametersmessage-length maximum client automessage-length maximu...
Before I posted I try but get this messageciscoasa(config)# policy-map global_policyciscoasa(config-pmap)# class inspection_defaultERROR: % class-map inspection_default not configured Then I use access-list.access-list OUTSIDE extended permit icmp an...
