Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all, I'm setting up AnyConnect client in an ISR Router. I can't get them working.I've followed this instructions and it doesn't work.https://www.cisco.com/c/en/us/support/docs/security/flexvpn/200555-FlexVPN-AnyConnect-IKEv2-Remote-Access.html He...
Hi, hope someone can help me out with a problem.We've got a call centre and users have Jabber on their PCs. They've started having some buzzing noise on their calls and random PCs and time. Call manager is over a MPLS, this problem doesn't happen to ...
Hi all, I've been facing this issue. I can't ping the ASA interface from a network across the MPLS connection. I can ping from local LAN.I have a Cisco ASA 5510.
Cisco Adaptive Security Appliance Software Version 8.4(7)30Device Manager Version 7.1(4...
Hi Georg, thx for your reply. Switch is 2960X Version 15.2(2)E5. I don't really know which Jabber version they're using. All Windowns PCs. The following configuration applies in all ports.!show mls qos interface gigabitEthernet 1/0/2GigabitEtherne...
Hi Rahul, I can't do either of them (ping, ssh or https). I have the management-access enabled on Inside interface. The ACL is allowing and when I watch the logs on ASDM I can see the connection building up.Thanks.
We have monitoring Server within 192.168.22.0/24 on HQ. However I can't ping my Inside interface on a ASA (192.168.100.0/24) in a remote site across our MPLS link. I can ping the MPLS interface and I can ping Servers within 192.168.100.0/24, but not ...