Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
The bug only refers to documentation. But in fact, it is also not working either.
Since we upgraded to 9.10 with or without rfc5424 option in the new logging timestamp command, it sends some log messages with the rfc compliant option and others not.
...
I am looking for a solution for the following requirement: In IBNS 2.0 I need to get the informations about the configured "swicthport access vlan" from the requesting switch. Since the switch itself knows the static configured vlan from the port-con...
I hava a similar question like was already asked but without any useful answer in this Entry:
https://supportforums.cisco.com/discussion/12318371/how-deploy-prime-infrastructure-template-selected-interfacesports
I have to deploy IBNS 2.0 on all acce...
Hi communityI have a stupid issue with IBNS 2.0 while doing Dot1x and MAB concurrently.Because for MAB devices the authentication using dot1x will fail since there is no supplicant responding, I alway get the following log messages:...%DOT1X-5-FAIL: ...
I maybe have a stupid question, but I did not find any useful way for my problem.My customer ist using 3850 access switches. He want to enable monitor mode in first phase to do the inventory of all connected endpoints. Second phase he wants to move t...
Hi Nikhil
Have you been able to get it run?
I have been on the same setup Saj mentioned: 802.1x with Device Cert und passiveID Agent for user. But this was never realy successful since the passiveID Agent was too slow for roaming clients and the Use...
I found the answer to my question, which is quite simple:"It is not supported on C2960S" but it is nowhere written, but between the lines ther is a Statement like this:IOS 15.2(3)E: The following commands were introduced or modified: "access-session...
It seams that the command above "access-session attributes filter-list list custom-name" is not available in IOS 15.2-2.E5 on my 2960S-48...I mean: I have been gine through: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_usr_8021x/configuratio...
KeyvanI had the same requirements some years ago already, and we decided to use the API to solve the issue since ISE does not support dynamic IP assignment, which in fact is a poor situation since it was there in ACS 4.x and before...This for we buil...
CraigThanks for this clarification on how the whole process is done.Unfortunatly the bug is not visible for me in the bug toolkit and your link references an internal site. Anyway: After doing some more test's, we figured out the following behaviour:...
