Hello,Can anyone tell me whats the naming convention for product number for example X2-10GB-LX4MEM-XCEF720-512MBF-S720-64MB-RPor point me to a doc that explains the same.ThanksPrashant
Hello horacio27As Joseph mentioned VSS bundle acts like a single logical device like a 3750 stack. L2 decisions are taken by each switch however Routing is centrally managed.Since you are talking about 2 servers connected to VSS pair on different phy...
HI Again Keiran, I tried thinking of an example where "ORIGINATED LOCALLY" works but weight doesn't, but couldn't think of any.Since this post is marked "Answered", no one else is looking into it. I suggest opening a new forum for it.When you find t...
LocPrf is a Well-known Discretionary attribute, simply put, it must be known to all BGP but may or may not be sent to everyone.so when a prefix is learnt from an eBGP peer, local-pref is not communicated, however, the receiving router must have a val...
Hi Keiran, It won because it came from eBGP "7/PREFER [eBGP] over [confedBGP] over iBGP: "Default local-pref is 100. Even though local-pref doesnt always show up in show ip bgp, it still remains 100 unless it is changed. You can confirm it by issuing...
Nicely explained Nagendra! one vote from meI tried MSS and disabling transport path mtu discovery but no luck,finally fixed by adjusting MTU size on the interface.
