About Diana Mascarenhas

Diana Mascarenhas · 01-27-2013

Hi,I am planning to redesign the DC by replacing theexisting 6500 catalyst cores with Nexus 7004and introducing an access layer with multiple 6500 catalyst , nexus 5500 and nexus 2200 as access switches.Are there any known issues for Nexus 7004 as c...

Diana Mascarenhas · 05-23-2012

Can we have the below setup with VPC on Fex as well as Host Server ?

Diana Mascarenhas · 04-26-2016

I had a similar problem. While investigating for another issue it was found that a SFP on one of the downstream switches connected to the Nexus 7K was faulty and generating errros. Replacing this SFP stopped the generation of these multicast error me...

Diana Mascarenhas · 01-30-2013

Hi ,Thanks for your reply.Actullay I am planning to setup a pair of Nexus 7004 each with M2 series 24-port card. Connect them via VPC and configure them as L3 Core switches. Downstream to these cores , I have plans to connect 4 x 6500 catalyst as ac...

Diana Mascarenhas · 05-23-2012

Thanks Lucien and Michael.

Diana Mascarenhas · 05-23-2012

Hi Michael,Thanks for the info. I have 5.1.3.N1.1a version. I suppose that should support Enhanced vpc.Thx.Diana

Diana Mascarenhas · 03-07-2012

Hi Lucien,As I mentioned earlier I do not see any latency in the ping response from the first pair of switches which is not cross connected(Connected as regular port channels), but I see the latency in the secondpair which are cross connected via VPC...

Member Since	‎03-05-2012 02:08 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	9

User Statistics

User Activity

Nexus 7004 integration with Cisco 6500 catalyst

Nexus 5548 with Fex vpc and Host server vpc

I had a similar problem.

Nexus 7004 integration with Cisco 6500 catalyst

Re: Nexus 5548 with Fex vpc and Host server vpc

Nexus 5548 with Fex vpc and Host server vpc

Re: Ask The Expert: Nexus 5000 and 2000