Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello All,
I am booting UCS-B blades from the external storage but 1 blade out of 8 fails. I got it logged to the fabric (as well as the target). Also I have default-zone permit for these VSANs on both fabrics A/B. When I check on the adapter level...
Hello everybody.In the attachment you can find the picture of my network topology.I have two ASA5505 and L2L IPSec tunnel between them. On the left, there is a server with 10.1.1.254 ip address. I want hosts on the right to access it via 10.1.2.254 a...
Hello,I have purchased two catalyst 3560 switches (with 24 interfaces) on Ebay to prepare for ccnp switch exam. It would be great if I have 4 switches. Is it any possibillity to create two logical switches from one? I mean, not by assigning interface...
Hello,Whilst configuring CISCO867-W router I have encoutered the following problem.On built-in access point I have one Dot11Radio interface. Is it possible to have two ssids associated with two different vlans on one interface? If yes, how to do it? ...
Hello everybody,I've tried to upload ios image to flash via TFTP in rommon mode. It is the only possibillity to do that - it's 2650xm so there isn't a CF card. What is more, the previous ios image is damaged, so I cannot boot the device. New IOS imag...
Hi Rick,
Thanks for posting. Nope, there are 8 different service profiles. However, in this specific service profile (for 1 of the blades), the boot policy looks good as well as expected wwpns are assigned. And this is also reflected on the adapter...
Ok, I solved the problem.Unfortunately using SolarWinds TFTP server didn't work. In the same moment, uploading was aborted.So I have uploaded another ios image which requires only 32mb of flash. Automatic erasing and uploading process went well. I've...
