Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi everyone,I'm having trouble finding any information on what these logs could mean:2011 Oct 27 16:17:48 XALBCVMNX01 %FWM-2-STM_LOOP_DETECT: Loops detected in the network among ports Po3 and Po4 vlan 100 - Disabling dynamic learn notificationsfor 18...
Hi,Can anyone tell me if it's possible to create a VPC directly from a Nexus 5000 to an ESX Host? My host is running 2 Qlogic 8152 CNAs, and i've got them connecting to 2 Nexus 5000 switches. My problem is, when I create the VPC and I bind the VFC to...
Hi guys,Please have a look at my topology attached.Right now this is what I have configured on the core:ip wccp 61ip wccp 62int vlan 151ip wccp 61 redirect inint vlan 173ip wccp 62 redirect inThe same is configured on the branch office with the appro...
Hi,I'm having troubles getting HTTP acceleration to work on WAAS 4.1.1b.I have created a branch office topology with a 2Mb link with the data centre. Both locations employ a WAE-512-K9.When looking at the dashboard, I can see that traffic optimizatio...
Hi,I'm trying to get my Central Manager going but I'm finding the documentation very confusing. I installed the image (WAAS-4.0.19.14-K9.bin) and when it comes up the first time, the appliance is in application-accelerator mode. So I change the devic...
Hi,Sorry for taking forever to reply, but in the end it turns out it looks like it's normal behavior.I had TAC on a webex and they couldn't see why this was showing up in the logs. Combined with the fact that I had no issues whatsoever with this envi...
Since posting this i've realized that it's Spanning tree that is causing the issue on switch 2.I created a vpc between my 2 nexus 5000s. Then...On switch 1 my fcoe vlan is 500 (matching vsan 500). All ports are forwarding in STP because this bridge i...
Ok I updated the code. I'm now running:Cisco IOS Software, C3560 Software (C3560-IPSERVICESK9-M), Version 12.2(46)SE, RELEASE SOFTWARE (fc2)However, it's still not redirecting any packets.This is the config I have on the 3560:ip wccp 61ip wccp 62inte...
Aha.Gotcha.I'm running:12.2(44)SE2.XCDSKPA0001#sh verCisco IOS Software, C3560 Software (C3560-IPSERVICESK9-M), Version 12.2(44)SE2, RELEASE SOFTWARE (fc2)I will load the new code tonight and hopefully it will solve my problem.If not i'll post the co...
