Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
To test the VPN performance of ASA 5540, I will have to build at least 1000 VPN tunnels. It is time-consuming works if I put all of commands line by line manually. It looked like a bundle of VPN tunnels won't be created by ASDM. I am wonder if there...
we are using ACE4710 to load balanced traffics accessed the our mainpage: www.lplan.com.As there are different APPs running on four real servers(APP1,2,3,4), we configured class-map based on folder such as /cwon/....etc.BTW, sticky session is set up ...
In our network environment, eigrp is using and setup is as follows:router eigrp 100 redistribute static network x.x.x.x ....... distribute-list 3 out staticip route y.y.y.y ......ip route z.z.z.z ...... Also access-list 3 is configured as:access-list...
I tried to configure ACE module installed 6500 switch with brige mode. But it always failed.The subnet (both VIP and real server) is terminated in the ASA firewall. for example, vip is 2.2.2.2 and real server is 2.2.2.100. when our internal user run ...
In our network environment, we already completed the Qos setup for WAN link. We would like to turn on auto qos in our LAN environment with cisco Voip phones. I also researched both document and previous topics, but I still am not clear about the conf...
Hi Jonathan:I still have a question about Qos related to server. In the core switch ,for example we create server VLan as Vlan2. My question is could I setup auto qos to Vlan 2? If I could, is it still required to set up auto qos for each physical sw...
Thanks Jonathan for your quick response!About command mls qos trust dscp, will I have to every interface including in the access ports connected to phone?In our environment, almost network devices are 3750, but there is still 3550 and 3560 as well. A...
