Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello, recently we purchased a couple of the new ISE 36XX series appliances and they come with ISE3.0 from factory. We need to downgrade them to 2.4 to run some testing before going to 3.0. Is the only way to downgrade is to run process from CIMC?
Hello, Looking to see if you can provide some thoughts about the following. We are rolling out authentication on the wire via ISE. We have first enabled monitoring on switch ports to gather visibility of devices and then whatever is doing MAB we are ...
Hello, Wanted to run this question by you guys: We are deploying 3 Guest PSNs (One per region) which are going to be used only for Guest Self registration portal and sponsor approval services. Is it possible to: If I am an Americas Guest user to:Re...
Hello, we are currently have issues with users making voice calls over one of our circuits. Over the last 3 months % of bad calls has increased. Internet provider can only provide utilization graphs which shows utilization to be OK but nothing else. ...
We have a manufacturing handheld running WIN10 that needs to connect to an specific SSID on our network. Handheld needs to do certificate authentication + user and password. The user and password piece would be configured on the WLC. As far as the ce...
Hi Francesco, Thanks for the reply. Yes, Guest SSID will be the same across the entire environment. Our RADIUS servers are going to be ISE on our case so you are saying that there are two parts. The WLC needs to be configured for example if its an Am...
Hello Franceso, thanks for the reply.Let me provide more details.These Guest PSNs are only for Guest portal registration and Sponsor approval. We have The admin notes in the backend.We are not using AnyCast but rather we are levaraging DNS, here is a...
Thanks but looking more for a software that we can perhaps install on a machine with different SLAs to different IPs to measure different metrics that we could configure.
