Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,We recently setup a VCSe and VCSc with TMS PE on our network. We created neighbors for our older Tandberg Gatekeeper and Border Controllers and I can dial Jabber - Jabber and Jabber - video endpoints (Tandberg 3000) on our network (both inside...
HiI have vpn services setup on our Pix 515I have 2 internal networks behind my firewall.Network 1 is on the same subnet as the pix inside interface.Network 2 is one hop removed on another vlan. Traffic is passing between these 2 netowrks and both net...
I am setting up a vlan on a layer 3 cat switch behind our pix. I have routing setup correctly on the switch and I have a route inside statement setup on the pix. the hosts on the new vlan subnet can access the internet through our subnet but cannot ...
Patrick,Okay, we are 99% sure our bridge just doesn't successfully support SIP. We are running J4.5 software on the MPS800. We can take H323 endpoints and register them with either the VCSc or the VCSe and dial the bridge and join a conference just...
Patrick,Both our internal MOVI clients registered to the VCS control and the external MOVI clients registered to the VCS expressway are seeing the same symptoms - audio only. The only luck we have had in creating a neighbor zone is from the expressw...
Patrick,Thanks for replying, I appreciate the help!Our MPS is running J4.5 and the VCS is running x7.2.1... Jabber clients are the latest version.I created a neighbor zone on our VCSe with our Tandberg border controller and gatekeeper. I'm wondering...
