Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
There is no command or access-list on our router that can denied ICMP packets but we can not ping anywhere on internet but our in the our LAN , there is no problem and all of our client have internet and good staff,version 12.2no service padservice t...
himy cisco br342 bridge firmware is 8.24v. i wanna upgrade it to 8.65 or higher. how do i this?would you please tell me that what kind of Firmwares is best for me.i have two aironet342 Bridge, and have 4Km distance from eachother.and i have 2 Andrew ...
You can do it with PBR(PolicyBasedRouting) but if you have 3 class /24 ip addresses and such your fa0 ip address is 172.16.30.1 , then if your provider route all of your 3 class to this IP , your problem has solved and you dont need to do PBR. and wi...
HIyou should lie to mrtg for this interface that this interface is a ethernet interface :)))by this way..you should change something in your MRTG.CFG .. in the ifType line as you see ,,after i tell to mrtg that this interface is a ethernet interface...
HII think this problem occured from the other side maybe, set the Keepalive command in your interface and check the other side.check the snmp-community access that is it write or read access if you set snmp-server on your router.NIX TECH.Mohsen.
