About varokyan

varokyan · 08-13-2017

Hi All, Iam haveing connectivity issue.We have esxi server 5.1 running on cisco ucs 6120xp firmware 2.28a Esxi server 5.1 is haveing 2 nics .nic0 and nic1 .both are configured to use managment network,vmotion and also for vm data.But if i enable bo...

varokyan · 05-10-2017

Hi , I am setting up ISCSI boot lun .I have configured the IQN,IP and IQN target (which is from netapp storage).Iam getting Initiator error 1 and ISCSI login error ,were there is no chap login configured at storage or ucs side. below is out put from ...

varokyan · 08-12-2016

Hi All,Need help we are running Cisco ucs with B200M3 blade and firmware version is 2.1.1e. I want to upgrade to 2.2.8a .Please let me if any out found issue with this 2.2.8a version.This is new project i dont want to create any issue.Please help me...

varokyan · 08-16-2017

i used same steps mac address change .But after reboot again mac address conflicts

varokyan · 08-15-2017

Hi walter, Fould that duplicate mac address on physical nic and vmknics.I deleted mac address on vmknics .After readding it vmknics took new system mac address. But after reboot of esxi server it again mac address is confliect .the physiclal nic mac...

varokyan · 08-14-2017

we are useing standard vswtich and ip is assinged to kernal port.yes i can ping esxi mgt port out side when only nic0 is enabled and nic1 is disabled.We have only one vswitch and nic0 and nic1 are teamed with this swtich.. thinking something wrong a...

varokyan · 08-14-2017

Hi Walter, the esxi server has 2 nics .nic0 and nic1 .I can ping if i enable only nic0 on esxi server from outside ucs. nic0 is attached F-A and nic1 is attached to F-B. I tried doing failover to F-B as lead when I do it nic1 will start to ping bu...

varokyan · 05-14-2017

Hi Walter, Is it recommanded to keep one ISCSI Nic to failover for Fabric B.Instead for 2 nics which we usually configure of one for ISCSI Fab-A & another for Fab-B.. Please advice and let me know the impact aswel. Thanks, victor

Member Since	‎08-12-2016 08:01 AM
Date Last Visited	‎05-23-2018 02:01 AM
Posts	13

User Statistics

User Activity

Cisco ucs-Esxi nic not working

ISCSI Boot issue

Cisco UCS Frimware upgrade

i used same steps mac

Hi walter,

we are useing standard

Hi Walter,

Hi Walter,