Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello all,I've experienced a strange problem with a customer of ours. The setup for this customer uses 2 core 3750 L2/L3 switches configured with several vlan's and hsrp groups (with svi interfaces) all configured on these 2 3750's. Between the 2 375...
Having some difficulties with a pix 6.3facing the task to provide inbound onnections from lower security interfaces to several network segments behind the Pix's inside interface.I'm not sure what my options are to provide translations for inbound con...
Hi there,Having some questions about an 802.1x/non-Cisco ip phone setup and was hoping to find some answers/user-experience with this setup.Main questions i'm facing:1) When using non-Cisco ip phones (eg Nortel or Siemens) and a previous authorized c...
Is it possible to direct aaa authentication/authorization for my "auth-proxy" function to one TACACS server and send all other authentication/authorization requests to a different TACACS+ server?
Hi,I'm currently testing with Cisco's SDM interface combined with Cisco ACS authentication using rsa secureid. Tests without the rsa securid, just a username/pass combination all works well, however combining the securid, sdm keeps popping back up. C...
Glen/nambi,Thanks for you responses so far. Let me do some checking on the udld aggresive mode, to see if this can prevent similar future problemsDennis
Guys,I'm not convinced that udld aggressive mode will prevent this from happening in the future. I was already using udld detection on all the links. The link got err-disabled because of a link-flap, not because of a udld-detect event. The other site...
Hi Nambi,No i don't think it's a unidirectional link failure. As one side got err-disabled, the other side had a down status, so this link wouldn't normaly be used anymore by the ether-channel.RegardsDennis
