Hello Everyone, I am needing some guidance on enabling traffic between interfaces on the ASA 5510. Of course I have an outside interface E0/0 and an inside interface (E0/1) for normal operation. The idea was to enable one of the remaining interfa...
Hello everyone! This issue is driving me nuts.... I have even been talking with CCIEs on this and no luck. My next step is to initiate a TAC but was hoping someone on here could help or has seen my issue.We have 4 brand new 3750G switches and out...
How do you keep Voicemails from being delivered to a Subscribers exchange mailbox?In our environment most people want to receive their voicemail in their email but in a few exceptions, they do not..... Is there a way to keep the voicemail from being ...
Hello all, We are using a WiSM in a 6500 and everything seems to work fine. The WiSM Controllers are 10.x.x.2 and 10.x.x.3. Basically when our LAP1242AG APs join the 10.x.x.3, the 802.11a radio configuration is not available (no hyperlink) on the...
Hey everyone! I am hoping I can find some help with configuring the AP Groups VLAN feature on a WiSM + WCS ver 4.2 environment. I enabled and setup AP Groups VLAN for a campus type network acording to the guide here:http://www.cisco.com/en/US/tec...
Okay I will give this a shot.... We're running 8.3 so the commands have changed a bit for NATs but I will give it a go and report back what happens....Thanks again,Ed
Thank you for the reply.... The best way to describe what I want is I want E0/2 and E0/3 to be able to access the E0/1 interface. I guess that is the best way to describe what I am trying to accomplish. The 5505 has a built-in ethernet switch that f...
Hey Trent, That would be great if you let me know where you get with TAC. From what I can tell it is mostly random in our situation. We haven't been able to associate any rhyme or reason for why it happens or when it happens.We can go 30 + days ...
Unfortunately no I had never gotten this resolved.... We have been limping along hoping to upgrade our WLCs soon..... Sorry.... I verified we had everything open port wise so no answer yet.....Have a good one!Ed
Yeah, we thought that too, but was sent a new one tested at the reseller's lab. They said it all checked out.... I just discovered what I believe is the source of the problem!We bought all brand new GLC-SX-MM for these switches. We just tried an olde...
