Router: CISCO 2901/K9/SEC with 2 EHWIC 4 port Gigabit Ethernet L2 switch cards installed.Configuration: 9 vlans with Policy Based Routing for 7 inside networks and 2 outside networks.Problem: Windows Server 2012 RDS (Remote Desktop Services) stops ...
I'm sure this is simple to resolve. I just bought a new Cisco 2901 ISR Router. How do I configure the Cisco 2901 ISR Router for Zone Firewall? The "zone" command is not recognized and does not show up in the "?" list in config or user modes - so I...
Steps to repeat the bug:1) Physical Reset of SR520-FE to factory defaults2) Run CCA 3.1(1) and connect to 192.168.75.1 using the default cisco/cisco login3) Under the Home Menu, click the Device Setup Wizard4) In Step 1, sellect the SR520 and obs...
Did you ever get this working?I have a new C1111-4PW Router with this same issue. This is also my first experience with an AP/WLC. My scenario is slightly different, but results are the same: The built-in AP/WLC cannot communicate with the Router u...
We are having the same problem on Cisco 2901 ISR but we are only able to define 22 class maps! This bug needs to be fixed. 22 class maps are not adequate for this performance router. There is no mention of this severe limitation in the pre-sales p...
We are experiencing the same BUG in our new CISCO 2901/K9 ISR.This is definitely a bug because we get this exact error when adding only the 23rd class-map. After the error occurs, it pops up again when doing other class-map and policy-map configurat...
I was not able to get "ip access-list extended" to work with class-maps in IOS 15.1(4)M4. You may get around that issue by using the access-list numbering instead of names like "ip access-list extended myacl164"As a work around, I used the followin...
I have a brand new Cisco 2901 Router. Like aslam.bajwa in this thread, PBR was not working on our Cisco 2901 ISR. Does the Cisco 2901 ISR require an additional license for PBR? (Answer = NO, see link (1) below) Do I need an IOS update to fix the pr...
