Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I recently installed a new ASA 5515-X with software version 9.1 installed. Everything is working great except for outbound PPTP VPN connections to remote servers. I have enabled PPTP inspection like I have with other installations but the PPTP conn...
I have "inherited" a Catalyst 4506 with IOS version 12.2(20)EWA1 and Supervisor IV already installed. We recently purchased a second Supervisor IV and I am looking to install this second supervisor for redundancy. Is there anything special with ins...
I have a site to site VPN between Site A and Site B. Can I create another site to site VPN between Site A and Site C when Site C has the same subnet as Site B? Is there some way to NAT one of the sites or do I have to re-IP? Thanks!Site A (10.10.1...
Removing all trustpoints and related certificates worked for me. I re-imported my on-premise CA root certificate and aaa/certificate VPN is working again.
See Bug CSCus78450. Looks like we'll need to remove all trustpoints and re-build them. I will be doing this potentially this evening and will report the result.
My preferred method would be to bring the routing at the DR site down to the switch if that point to point link is your preferred connection. Or, you could figure out a way to send Corp-To-DR traffic over your VPN tunnel.
