Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Does anyone know the correct software location to download IOS XE software for an ASR C1101-4P router? The router currently has the following image loaded - c1100-universalk9.17.03.03.SPA.binHaving difficulty locating the location in software downlo...
seeking guidance. I have an ISR4331 version 17.3.5 and working to configure NAT and having difficulty. Consider the g0/0/0 interface the inside and G0/0/1 the outside. TCP traffic initiates from the outside. Source /24 network will target an IP ...
We recently performed a DR failover event for our distributed ISE environment which consists of 4 nodes, a PAN/MnT and PSN node in geographically distinct data centers. We shut down the ISE application on the primary data center PAN and PSN in order...
Hi,Does this version of IOS support IP NAT?Cisco IOS Software, s72033_rp Software (s72033_rp-IPSERVICESK9-M), Version 12.2(33)SXI4a, RELEASE SOFTWARE (fc2)not having any luck in having NAT work on 6509. we are attemtping to NAT traffic after passing...
Hello. I wanted to inform that I tried your suggestion but still, the ip nat outside source route-map map-aws pool pool-aws was not performing as needed and have decided to perform this "hide NAT" function at our firewall, which is the next hop route...
hello,including my configuration for NAT. My ip nat inside source static config statements are now correct. I had to reverse my logic for inside local and inside global. Now when the AWS host targets 10.240.1.11 the destination address as it leave...
Hello.The diagram was originally authored by another source, I just re-purposed it. The icon at the customer edge is representing the ISR4331 where the NAT will ocurr. There are two NAT operations in our application. The first NAT operation, which...
