Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi GuysTwo sites are on MPLS connection and things are working great. Now am looking to connect a second ISP and create a fail-over site-site VPN. If the primary ISP fails (in case of a complete blackout at an ISP level which is unlikely to happen bu...
HiI wanted to reset the password on the switch 2900xl. As per the document i hold the mode button down while the switch is unplugged. I plug back in the powe cable and when the light goes off on port 1x i release the mode button. The switch does not ...
Hi AllI have a ASA 5510. on the firewall dashboard i have a firewall usage status window. I see a chart and some statistics. The first one says ESP traffic and i have one for http, https etc. i am wondering if the ESP traffic includes all the protoco...
Hi AllI have a cisco ASA 5510 at the branch here. It terminates about 8 vpn tunnels and also it supports remote access clients. I just have a quick question. Can my remote sub-net group access the other remote access site-site VPN subnet group. If ye...
Hi GuysI would like to analyze the traffic flow on my ASA5510. can i actually monitor the interface on the ASA 5510 (be it inside or outside) using Wireshark without having to create capture access-lists. i use wireshark to monitor my local machine b...
Hi Guys,I know this is post is kind of old. But I am implementing something very similar and would like to know how it was implemented highlighting configuration details.Thanks.
no wonder why you are amazed. It's not in production. It's a very old switch that i am going to use for testing.. I will give it a try. Thx for your reply...
