Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a stack of five 3750X's connected in a single stack with the stackwise cables. Within this one stack, I created two power stacks, one power stack has 3 switches and the other has two switches. In each of the separate power stacks, one power ...
I'm being asked to provide wireless coverage in a couple of outdoor areas about 50 - 100 feet out from our main building. I'm looking for some recommendations on access points and antennas to use. In our current indoor environment, we are using WiS...
The certificate that is installed on the wireless clients and the ACS will be expiring. The cert on both was installed from a Microsoft certificate server, which needs to be replaced/upgraded. What do you think of this plan to renew the certs?1) Cr...
I'm thinking one access point would be mounted to each of the bottom outside corners of the overhang/canopy (two access points total), which is about 15-20 feet off the ground. We need to be concerned with how the installation looks, so the smaller ...
Thanks Leo. If we mount the access points about 50 feet out from the building it will be within 100 meters of the nearest data closet, so getting power to the ap isn't a problem. There are overhangs of about 20-30 feet at each location, so maybe wh...
Our Microsoft guys just renewed the cert on the existing cert server (not certain of the exact procedure for that), then I created and installed new certs for the ACS servers. I can confirm that once the cert was renewed on the cert server, all of t...
