Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello, We are working on an IWAN solution where dual ISR 4451-X are used at the Hub (DC) as WAN aggregation and at the remote site we have ISR 4331 or ISR 4321or ISR 892FSP. We are going to implement WAAS and we have few n00b questions:I understood...
Hello,
We are designing an SSL VPN solution where customer requires to have multi-factor authentication using certificate, AD, and OTP.
Is it possible after validation of the certificate by ASA with the CA server to forward request to ISE for AD and ...
Hi Rami,Why don't you use VACLs. Below an example you can use on Faculty Vlan (VLB):ip access list extended TEST
deny ip a.a.a.a a.a.a.a b.b.b.b b.b.b.b
permit ip any any
vlan access-map Filter-VLA-TO-VLB 10
action drop
match ip address TEST
!
v...
Hi,I think all these 3 terms are almost the same but can differ regarding where they are implemented.Below quote from CCIE R&S Exam Cert guide, 4th edition, page 126CIDR is used for aggregating routes for multiple classful network numbers into a sing...
Hi,Let me quoute the text from "MPLS and VPN Architectures by Guichard and Pepelnjak" page 178.... a mechanism is needed so that the PE-router can distinguish which routes belong to which VRF. This is accomplished through association of a particular ...
Hi,For the role of GLBP weighting see quoted from cisco GLPB command referenceUsage GuidelinesThe weighting value of a virtual gateway is a measure of the forwarding capacity of the gateway. If a tracked interface on the router fails, the weighting v...
