About Robert Passey

Robert Passey · 04-08-2017

Hi all, I've been tasked with setting up a demo video bridge for my organisation, who are currently running CUCM v10.5(2) and have some loan endpoints (DX80 & SX10), they also have 8800 series video phones and jabber (11.7). I have installed CMS v2....

Robert Passey · 08-13-2014

Hi all, I'm experiencing some difficult controlling conference layout when using MX200 and EX60s. The user guide demonstrates being able to change the conference layout from the touch pad however I can seem to find this function, is it possible some ...

Robert Passey · 03-30-2014

All, I have recently been experiencing problems with our oversea’s telepresence endpoints when performing MCU calls, the customer is complaining of an intermittent blurring on all oversea endpoints are on a bridge calls, all P2P call are good quality...

Robert Passey · 03-23-2014

All,I am experiencing issues registering my IP phones with CUCM 9.1 since the introduction of a FW. If you see the attached diagram we have added a firewall put the DHCP server on an interface in a seperate zone with option 150 an since doing this t...

Robert Passey · 01-12-2014

Hello All,I’m after a bit of advice on the subject of H.323 authentication.I have configured credentials on the VCSc+e within the device local accounts field, then set the default zone and subzones to “check credentials”.On the endpoint (SX20) under ...

Robert Passey · 04-25-2018

Hi Patrick, Would you be kind enough to elaborate on how MARI works? We're struggling with diagnosing this issues due to it's intermittent nature. We are currently using Videxio as a cloud solutions and have the endpoints registered to this. Every no...

Robert Passey · 04-18-2017

Thanks Manish, Unchecked this option and the video appeared! Regards, Rob

Robert Passey · 08-22-2014

Really appreciate the advise but I'm still really struggling with getting this configuration working. I either lose video or voice is there the MCU and media resource group on CUCM are configured as the guide stipulate.I'm running the same version ...

Robert Passey · 08-17-2014

Thanks, I have followed the MCU deployment guide and configured a media resource group for the MCU, however I still can't get this function working without isssues such as loose either audio or video from at least one participant (and thats testing w...

Robert Passey · 08-14-2014

Hi Wayne, Thanks for the reply, I'm still having problems getting it to work seemlessly. If the layout control works I lose audio or video from the enpoints. I have followed the cisco documentation but still seem to have no joy. Can you let me know ...

Member Since	‎11-28-2012 01:50 AM
Date Last Visited	‎06-01-2018 01:42 PM
Posts	20

User Statistics

User Activity

CMS Space is not negotiating video codecs

Conference layout control with EX60/MX200

Bridge call causing intermittent blurring?

Phone registration problems with CUCM 9.1

H323 Authentication using local accounts on VCS

Re: Random Video Quality Issues - SX Devices & Meraki Mx100

Thanks Manish,

Really appreciate the

Thanks, I have followed the

Hi Wayne, Thanks for the