About scott.wysocki

scott.wysocki · 03-08-2013

I have a 2921 with 15.1.(4) and security-k9 license.Do I still need a subscription license or is this covered under SmartNet?The Cisco Services for IPS on IOS document states at the top:Effective with Cisco IOS Release 15.1(4)M, this feature is not a...

scott.wysocki · 11-12-2012

I am setting up a new T1 provided by a local ISP. When call inbound calls arrive from the PRI the call is routed to the proper IP phone but no audio is heard. Audio works from the VoIP phone to the PSTN side.My T1 controller counters are cl...

scott.wysocki · 03-09-2013

Sorry, here is what I found:http://www.cisco.com/en/US/docs/ios/sec_data_plane/configuration/guide/sec_ios_ips_srvc.pdf

scott.wysocki · 03-08-2013

jocamare, that document you are referencing is older than the one I am talking about, so which one is correct?

scott.wysocki · 11-13-2012

I appreciate everyones help on this. It was actually resolved quickly by the TAC. The fact that ip routing must be enabled for RTP to function may be common knowledge, but I wouldn'thave thought of this dependency. Since this router was single-le...

scott.wysocki · 11-13-2012

I wish it was just an ACL or Routing. Today I connected directly to the CME router and had the same results. I still think I am missing something simple, but I see no RTP from the CME to the VoIP endpoint.

scott.wysocki · 11-12-2012

Alex, I am beginning to think that as well. I just did a capture from a computer running IP Communicator and I see the RTP stream from the computer to the CME router but nothing from CME to the computer. I also tested from VoIP to VoIP and it works...

Member Since	‎02-20-2006 05:25 AM
Date Last Visited	‎10-06-2017 09:09 AM
Posts	9

User Statistics

User Activity

ISR G2 IOS IPS Licensing

No Inbound audio T1 PRI to VoIP

ISR G2 IOS IPS Licensing

ISR G2 IOS IPS Licensing

Re: No Inbound audio T1 PRI to VoIP

No Inbound audio T1 PRI to VoIP

No Inbound audio T1 PRI to VoIP