Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello. On a site-to-site VPN that was working fine yesterday...
On our end there is a ASA5505. On the other end is a Fortinet appliance. As I said - the tunnel has been fine for months.
The other side moved their datacenter to a new location - same I...
Hello,We have two new SG300 managed switches. I've upgraded the firmware from the stock to 1.3.5.58 with no problem but when I go to upgrade to the newest firmware - 1.4.x I get the following error on both switches:Files Transferred: 7011840 Status:...
Hi,I'm changing ISPs over the weekend and have to enter new IP addresses. I understand what I need to do at the site that has the new IP address but I just want to make sure I am correct on the remote site...All I need to do to update the end point i...
We have an ASA 5505 and are changing ISPs so we'll be getting a new static IP address. How do I change the external IP address using ASDM? (I haven't done it in 5 years so I'm rusty and just want ot make sure.) The ASA and ASDM are up to date.Am i co...
Thank you for the assistance. It turns out the other side made a slight change in the configuration. Once they restored from a backup, everything worked properly.
Yes, thanks to both of you for pointing me in the right direction. I missed the readme note that said you had to upgrade the bootloader to a higher version. Once I did that with tftp I was able to correct the problem. Thanks again.
