You need to set the access points to 1,6 or 11 that should help your bg spectrum, all other channels are overlapping. Make sure that there are least amount of other wireless for the channel in the area. Clients determine where they will roam which ...
We have statically set the power levels on the access points to 15dbm or power level 2 on 802.11a which is where our phones are. The 802.11b/g settings are atpower level 3. We have a high density implementation which made us use static channel sett...
What worked for me was set EAP request timeout to 20s.Upgraded to 1.3.2 or higher on the 7921 improved handoff.Check the 7921 phone RSSI compared to another known good phone. I have to replace or have TAC troubleshoot this. Some phones are consiste...
From what I seen the one way audio is caused by power level mismatch between the AP and the 7921.What we did is to set all the power levels on all the aps the same to eliminate power adjustments within the call.There is also improved handoffs moving ...
I have experienced the same problem on th 1010 APs. I have a heavy ap density situation with bleed throughs from between floors.Anyway, I manually set the power down on the b/g side to help with the co-channel interference I was experiencing. This ...
