Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I just added a AAA tacacs server group to a switch. I made sure to take turns disabling tacacs on both servers one at a time so that I could see that each server was responding as respected to tacacs requests from the switch. I have noticed since goi...
I keep receiving the below log on my 4506 Dec 11 17:25:14.000: %SSH-3-BAD_PACK_LEN: Bad packet length 1952022780 It started after I upgraded to the current version 3.09.02. I found the below link that seems to be my issue but there is no workaround g...
I have an aggregation 3750X stack switch at one of our schools... Multiple IDFs connect to it. It then connects out to our core switch There are I believe 7 switches in the stack.
On our monitoring software, 4 times a day, close to the same times...
Hi All,I have 4 ESX hosts that I am trying to add to my 1000v VSM. The first two worked using VUM but the second 2 hosts fail. The hosts all appear to be on the same build. I am running ESX 5.0 Update 1. In VUM I get the below error...***************...
Hi All,I have used Cisco ACS tacacs for authentication based on Active Directory. Is it possible to use Active Directory as a criteria for authentication AND source IP?For example, if someone wants to log in to a certain device... they must have corr...
The file I attached above is the only one in flash1: It should have all the input within it. I could not paste inside the forum because of the character limit. There is no more recent crashfile.
Yes, that switch did really go down that day. Usually though the device is really up when the alerts happen. Here's the output attached. (not sure how current it is since it's timestamp is 1993 but the clock is correct on the switch)
I was considering that. We are limited to@Leo Laohoo wrote:1. The stack is running 15.0(1)SE train. This is a very bad (and buggy) train. I wouldn't recommend anyone use this.2. The stack is 7 switches. That's too much.Regarding the IOS, stick with t...
