Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Are there any bundles or incentives when quoting several C9300-48P-E switches? For example a customer would like 10 of these switches. Thanks in advance.
I am trying to quote a Cisco Catalyst 9500-40X-A switch for a customer and the datasheet is unclear as to whether or not I need to include (5) of the FAN-T4-R= modules. I opened a PDI ticket and they said that the power supplies have fans built in an...
I am using a 2621XM with an AIM-ATM linecard and a VWIC-MFT-T1 card for an ATM to IMA connection. I have configured the T1 controller for ATM and the linecode and framing are correct. The ATM interface is set correctly for the aal5snap encapsulation....
So they fans that are built into the power supplies are sufficient to cool the system under normal operations, correct? Meaning I do not have to order the fan modules - they are completely optional.
It ended up being an ATM configuration problem (although I am skeptical). I didn't have the vbr-nrt statement corrct, which was causing drops. I think that I was looking a layer too high!Thanks for all the help!Tom
Log information on the IMA side:Jun 3 08:27:28.005 CDT: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 100: Neighbor 192.168.251.6 (ATM2/ima1.9) is up: new adjacencyJun 3 08:27:41.509 CDT: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 100: Neighbor 192.168.251.6 (ATM2/ima1.9) is...
Neither router has a K value set out of default.On the other router, it says that the holdown timer expired. The remote router is running a much newer version of IOS 12.3(6) I believe (I will verify and post later).Do you think this could be a proble...
