Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I would need assitance on explaining the heat map in Cisco Prime. Some AP's signal are shown as red (-35-45 dbm) , but some AP's are shown as yellow (-55-65 dbm).Utilization, power, comparing the AP which has excellent red signal and yellow/green...
Hi,I have a issue, as after enabling DHCP Snooping and try to release/renew again, It only manages to grab the DHCP IP like around 30 seconds.And, if the machine is restarted, it would take longer time or even sometimes would not be able to grab the ...
Hi,I would like to know whether CIsco ACE MODULE can be configured in such :CLIENTS : 10.10.10.XACE VIP : 10.20.20.20SERVER 1 ACTUAL IP : 10.20.20.21SERVER 2 ACTUAL IP : 10.20.20.22Both the VIP and Server are in one segment. This segment also are beh...
Hi ,Anyone has experience on INLINE configuation for IDSM-2. I have a setup where user vlan (L3) resides in FWSM @ Data Center switch and IDSM resides in another 6509 switch which connects to INTERNET.Both of these 6509 switch communicates via OSPF.A...
Hi Andrew, Are you able to solve the issue, as i am facing quite similar where the endpoint is compliant and after a minute it will be non-compliant, the compliant status change every minute, looking at the auth logs, device compliant status=false so...
Hi Scott,Are there any Cisco Doc states the info you have given? What kind calculation/algorithm does PI determine the dbm color per AP and what actually does it hear from other AP to determine the color.Thanks in advance.
Just to let u guys know, Case is solved as it is known issue for when the SVI is on the FWSM module. The reason for that is that we are not able to make the internal port channel between the MSFC and the FWSM as trusted.Here is the BUG for it :CSCsf1...
Hi Angel,It would be 24 clients per AP. Pls refer to following site :http://www.cisco.com/en/US/products/hw/wireless/ps430/products_qanda_item09186a008009483e.shtmlhttp://www.cisco.com/en/US/products/hw/wireless/ps430/products_gandalook under Q&A, Ai...
Hi Daniel,The traffic towards the ACE, can it be achieved if the ace context is parked behind the FWSM, and the context itself points the gateway to FWSM.And for Source NAT, can I also use back the same segment VIP and server segment?Appreciate if yo...
